Hi HPU-ADM,
There is no thumb rule for when it comes to configuring the BLAST or PCoIP values. However you can try by configuring the settings as per the below chart as a starting point and then tweak them as per your requirement.
Note: You can configure these via GPO or Smart Policies in UEM
Bandwidth Profile | Max Session BW (Kbps) | Min Session BW (Kbps) | Enable BTL | Max Initial Image Quality | Min Image Quality | Max FPS | Max Audio BW (Kbps) | Image Quality Performance |
LAN | 900000 | 100 | Yes | 90 | 50 | 30 | 1600 | 50 |
Dedicated WAN | 900000 | 100 | No | 80 | 40 | 30 | 500 | 50 |
Broadband WAN | 5000 | 100 | No | 70 | 40 | 20 | 500 | 50 |
Low-speed WAN | 2000 | 100 | No | 70 | 30 | 15 | 200 | 25 |
Extremely low-speed connection | 1000 | 100 | No | 70 | 30 | 5 | 90 | 0 |
Regards,
Rajesh
Twitter : @RajjeshPoojary