I managed to install MegaCLI and made some changes to an megaclisas-status file i found on the internet.
Now i'm getting this output:
-- Controller information --
-- ID | H/W Model | RAM | Temp | BBU | Firmware
c0 | LSI MegaRAID SAS 9260-8i | 512MB | N/A | Good | FW: 12.15.0-0239
-- Array information --
-- ID | Type | Size | Strpsz | Flags | DskCache | Status | OS Path | CacheCade |InProgress
c0u0 | RAID-1 | 3637G | 1.0 MB | RA,WB | Enabled | Optimal | N/A | None |None
c0u1 | RAID-1 | 232G | 256 KB | RA,WT | Enabled | Optimal | N/A | None |None
-- Disk information --
-- ID | Type | Drive Model | Size | Status | Speed | Temp | Slot ID | LSI ID
c0u0p0 | HDD | WD-WCC7K4DJYN7RWDC WD40EFRX-68N32N0 82.00A82 | 3.637 TB | Online, Spun Up | 6.0Gb/s | 27C | [252:1] | 2
c0u0p1 | HDD | WD-WCC7K2XS6SYZWDC WD40EFRX-68N32N0 82.00A82 | 3.637 TB | Online, Spun Up | 6.0Gb/s | 27C | [252:0] | 3
c0u1p0 | SSD | S21PNSAG950842K Samsung SSD 850 EVO 250GB EMT01B6Q | 232.3 Gb | Online, Spun Up | 6.0Gb/s | 28C | [252:4] | 4
c0u1p1 | SSD | S21PNSAG947444X Samsung SSD 850 EVO 250GB EMT01B6Q | 232.3 Gb | Online, Spun Up | 6.0Gb/s | 28C | [252:5] | 5
Now every reboot my files/modifications are gone again.
Can anyone put me in the right direction on how to create an vib file so they remain even after reboot.
Perhaps an nice web interfance would be nice...
Kind Regards,