Thank you for your answer,
the ports are configured " tagged VLAN10 / VLAN 11" exactly the same.
so VLAN 10 is working on the same host with the same VLAN 12 configuration.
somehow VLAN12 is not traveling over the port.
PORT-VLAN 10, Name internal-10, Priority level0, Spanning tree Off Untagged Ports: None Tagged Ports: (U1/M1) 1 2 3 4 5 6 7 8 9 10 11 12 Tagged Ports: (U1/M1) 13 14 15 16 17 18 19 20 21 22 23 24 Tagged Ports: (U1/M1) 25 26 27 28 29 30 31 32 33 34 35 36 Tagged Ports: (U1/M1) 37 38 39 40 41 42 43 44 45 46 Uplink Ports: None DualMode Ports: None Mac-Vlan Ports: None Monitoring: Disabled
PORT-VLAN 12, Name [None], Priority level0, Spanning tree Off Untagged Ports: None Tagged Ports: (U1/M1) 1 2 3 4 5 6 7 8 9 10 11 12 Tagged Ports: (U1/M1) 13 14 15 16 17 18 19 20 21 22 23 24 Tagged Ports: (U1/M1) 25 26 27 28 29 30 31 32 33 34 35 36 Tagged Ports: (U1/M1) 37 38 39 40 41 42 43 44 45 Uplink Ports: None DualMode Ports: None Mac-Vlan Ports: None Monitoring: Disabled
PORT-VLAN 11, Name kendall, Priority level0, Spanning tree Off Untagged Ports: None Tagged Ports: (U1/M1) 1 2 3 4 5 6 7 8 9 10 11 12 Tagged Ports: (U1/M1) 13 14 15 16 17 18 19 20 21 22 23 24 Tagged Ports: (U1/M1) 25 26 27 28 29 30 31 32 33 34 35 36 Tagged Ports: (U1/M1) 37 38 39 40 41 42 43 44 45 46 Uplink Ports: None DualMode Ports: None Mac-Vlan Ports: None Monitoring: Disabled
i have created a new port group for VLAN11 however it did not pas too !.
i have even deleted the port group and created a new one.
Do you suggest to have the physical switch ports as truck ? and allow VLANS on each ports of the virtual switch ?
Thank you