Hello,
I am currently implementing vCloud with NSX for which below is infra information;
Cluster - Management
> 3 ESXi hosts > Each host with 1 IP address of VLAN-50.> 1 vDS with 2 PGs > Management/vMotion & ProdVM
> This has VMs > vCenter, SQL, NSX manager, NSX controllers, RMQ etc
> I am deciding not to use VxLAN in my Management cluster, using VLAN PG only.
Cluster - Consumer
> 6 ESXi hosts > Each host with 1 IP address of same VLAN-50 > 1 vDS with 3 PGs > Management/vMotion, ConsVMs, VxLAN
> This will host Tenant VMs that end users will be accessing via RDP or SSH
> Tenant VMs should have internet, so they can use internet for searching or download etc.
> Only Tenant VMs will be on different VLAN, i.e. VLAN-60
NSX
1) 1 NSX Manager - given VLAN-50 IP
2) 3 NSX controllers - given VLAN-50 IP
3) VTEP - 1 per host - given VLAN-50 IP
NOTE:
# We have to use only one VLAN, and i.e. this VLAN-50 for the entire management setup
# VLAN-60 only for Tenant VMs
# vDS uplinks are connected to Trunk ports of physical switch
# MTU is set to 9000
# Each host can ping each other VTEP IPs
QUESTION:
For Consumer Cluster:
I will be using VxLAN only for Consumer cluster where tenant VMs will be residing. So for this setup, I need to know configuration steps, design w.r.t to which port groups needs to be created on this vDS and how will be the internal NSX connection be etc.
Thanks